Includes your choice of Colours and Textures. Epoxy Metallic Floor Finishing System Contains.Premium Tinted Epoxy Basecoat/Primer in your choice of colours - 4Lt Kits. Pearlescent Powder Pigments in your choice of Colours X2. One Large Kit of Ultra Clear Epoxy 7.5Lt (Topcoat). Covers standard Toilet, Bathroom, Shower, Laundry (Up to 15sqm). Offering Best option for decorative epoxy finish surface. Full Training and Installation Instruction Available. Grade Complete Epoxy Metallic Kit. 4Lt Basecoat Epoxy in your choice of colour. 80gr of Dominant Pearlescent powder (Pigments are used as super low dosage, this is plenty). 40gr of Feature Pearlescent powder (Pigments are used as super low dosage, this is plenty). 7.5Lt of Ultra Clear Topcoat Epoxy.
Colour Chart - Standard Basecoat Colours. SHIMICOAT offers all Australian Standard AS2700 Colours, consisting of 206 colours. Please contact SHIMICOAT office for your custom design tint. Colour Chart - Dominant/Main Pearlescent Metallic Colours.
Colour Chart - Feature/Contrast Pearlescent Metallic Colours. Each kit covers up to 5sqm countertop/benchtop/bartop.One Coat as Primer in your choice of colour. 10-20g/L of Dominant Metallic Pearlescent Powder. Small quantity of Feature Metallic Pearlescent Powder. Pour-On Metallic Epoxy at a rate of 0.5-1.0L/sqm. Each Coat (Primer, Basecoat and Clear Pour-On Topcoat). 8 Hours (Min, depending on temperature and humidity). 12-24 hours (depending on temperature and humidity). 7 days (Heavy Objects Exposure). Thinner & Diluent (Blend of Solvents). Ensure surface to be coated is free of all dirt, grease, oil, paint, curing agents and other contaminants. Removal of Oil Contamination by degreaser and alkaline cleaning pressure wash.
Acid-wash to enhanced surface porosity and etch the surface. Allow to completely dry, run Dry Test.
Place a piece of plastic over a small area, tape the edges and leave for 1 hour. Remove plastic, if there is no moisture on either surface, concrete is sufficiently dry. Ideally, always consider surface grinding and removal of loose materials. Grinding is always advisable prior to application of all Shimicoat Epoxy products, to maximize adhesion.For further information, please refer to SHIMICOAT Instruction for "Surface Preparations". Premium Tinted Epoxy 105PT is an industrial grade epoxy coating material for high performance floors. The product has various applications due to its excellent mechanical, chemical, electrical and adhesion properties to most substrates. Two components (A & B) comes in tinted, 100% solid epoxy used as basecoat, primer or tinted finish surface, with chemical resistance and durability, ideal for variety of floor coating systems. Premium Tinted Epoxy 105PT is a high-quality solvent-less, odorless two component coating system for concrete surfaces such as driveways, pathways, workshops and warehouses providing a tough clear film, high gloss and wet look to protect surface from stains, spills and wear. Premium Tinted Epoxy 105PT has been developed specifically for Australian conditions using the latest epoxy technology. It provides excellent protection against weathering conditions and the splash and spillage of a wide range of chemicals.
Premium Tinted Epoxy 105PT provides a highly durable, chalk resistant, wear and chemical resistance surface for concrete floors. High quality epoxy floor coating system in many colours that is solvent free when used as coating or binder. The product can be tinted in all Australian Standard Colours. Tinted Epoxy coating has specially developed to be incorporated with non-slip materials and a large number of decorative materials to provide your desired floor finishing system, with functionality and style. The surface may be laid as a thin film using roller applicator.
The thickness of the coating can be reduced by addition of Diluent. Aggregates may be added to the surface (while wet) to create a non-slip flooring finish. Modern, hygienic, functional and economical surface. Ultra Clear EPOXY UC100 is an industrial grade epoxy coating material for high performance floors. Two components (A & B) comes in clear 100% solid epoxy used as clear topcoat with chemical resistance and durability, ideal for variety of floor coating systems.Ultra Clear EPOXY UC100 is a high-quality solvent-less, odorless two component coating system for concrete surfaces such as driveways, pathways, workshops and warehouses providing a tough clear film, high gloss and wet look to protect surface from stains, spills and wear. Ultra Clear EPOXY UC100 has been developed specifically for Australian conditions using the latest epoxy technology. Ultra Clear EPOXY UC100 provides a highly durable, chalk resistant, wear and chemical resistance surface for concrete floors. High quality topcoat epoxy floor coating system that is solvent free when used as a clear un-pigmented coating or binder.
This coating has specially developed to be incorporated with non-slip materials and a large number of decorative materials to provide a floor finishing system, with functionality and style. Aggregates may be added to the blend to create a non-slip flooring finish. Guaranteed modern, hygienic, functional and economical surface. For Special Effect Resurfacing Systems.SHIMICOAT Metallic Pearlescent Pigments are special luster effect pigments composed of mica nano-particles coated with various inorganic pigments to create metallic effects that mimic the natural look of stone, marble, granite and rock formations. These unique pigments are designed to be blended with our 100% solids clear Epoxy resins. When the metallic particles are mixed with epoxy, they give the coating a shine and gleam that reflects light and creates eye-catching dramatic effects. Metallic Pearl Powder Pigments in Epoxy. Metallic Pearlescent Pigments are commonly used in epoxy coating systems as the mid coat (second coat) over the primer/basecoat Epoxy. Metallic pigments should be mixed with clear epoxy and installed over an epoxy tinted base coat. The most popular basecoats are Onyx Black or Pearl White.
Typically, people use black for base coat. If you're just using the metallic powder pigments in a clear coat you need to put your coating on much thicker than normal rolling or brushing, in order to cover and achieve the desirable color. Metallic Pearlescent Powder Pigment shall be added into 15 Liter of 100% solids epoxy to be enough for 15sqm of coverage of rich 1000µ coating. There is no limit on how thick you can apply the Ultra Clear Topcoat and can be applied 2 or 3 or even 5mm thickness. Please note each 1.0mm is equal to 1000 Micron and require one liter of epoxy resin.
Metallic Pearlescent Powder Pigment can be used in floor coating, countertop resurfacing, wall paints, plastic molding, ink applications, arts and crafts. Always test your method of use before applying to your entire project. Our Pearlescent Powder Pigments being used globally to create unique stunning Polyurethane & Epoxy Resin designs. It is a great fun to play with these pigments and create your own unique and exotic colour combinations. Using our Pigments, you will be guaranteed; Non-bleed or Fading, Non-Rust or Toxic, Vegan & Cruelty Free, Food and Drug Administration (FDA) compliance and temperature resistance so can be used for worktops and floors with underfloor heating.Shimicoat Pearlescent Powder Pigments mix well with any clear epoxy on the market and disperse rapidly. Composition of SHIMICOAT Pearlescent Powder Pigments. SHIMICOAT Pearlescent Powder Pigments contain the following mineral and inorganic compounds at different ratios for various colours and effects.
SHIMICOAT Pearlescent Pigment Powders are composed of above metal oxide layers of moldy mica. Pearl pigments change the thin layer of metal oxide to produce different pearlescent effects.Compared with other pigments, pearlescent pigments have an unparalleled effect on the unique soft pearl luster. The special surface structure, high refractive index and good transparency make it the same effect as pearl in a transparent medium. It contains 100% naturally occurring inorganic compounds. The excellent chemical and high temperature resistance of pearlescent pigments offers its potential for wide application in coatings, inks, plastics and many other fields. They provide a new color system and color quality for these products. SHIMICOAT Pearlescent pigments are low in heavy metal and meet the safety standards to be used in many commercial and domestic applications. Both acid and alkali cannot attack pearlescent pigment at room temperature.
SHIMICOAT Pearlescent Pigment cannot burn, is not self-igniting, is not conductive, and can withstand high temperatures of 600800 °C. Pearlescent pigments can also be used in reactive coatings for radiation curing systems (electron multiply curing, photocuring). SHIMICOAT Pearlescent Powder Pigments ore one of our most versatile product that can be used to create your desirable metallic or pearlescent effect in many resin systems. The product may be used in acrylics, oils, printing inks, encaustics, alcohol inks, epoxy, glues, casting resins, clay, varnishes, etc. Pearlescent Pigments are safe, inert pigment that exhibits extreme colorfastness and stability.
The different particle sizes produce different effects, from a smooth pearly luster, to a highly metallic sheen. The product creates a metallic effect without being a real metal, it will never tarnish or fade! SHIMICOAT Pearlescent Pigment Powders are specifically engineered for art/craft materials, surface coating and industrial applications. They are NOT recommended for cosmetic use. The basecoat Premium Tinted Epoxy PT105, is a durable foundation for rich and high build Ultra Clear Topcoat Epoxy, to support and ensure longevity of finished surface.
A few selected features of the finished topcoat "Ultra Clear EPOXY UC100". Modern, Hygiene, Functional and Economical. Heavy duty clear or pigmented coating for concrete and polished concrete floors. Highly resistant to chemical attack, spillage and heat up to 140.Long lasting and easily maintained with good resistance to a wide range of domestic and commercial chemicals. Solvent free when used as a clear un-pigmented coating or binder. Seamless, easy to clean and maintain. Suitable for Flake Flooring systems, see SHIMI FLAKE flooring system. Superior Chemical Resistant Finished surface.
Solvent Free (Unless you apply Diluent for thickness control). DIY Friendly, easy to apply and curable over a wide range of temperature. Physical & Chemical properties of Topcoat "Ultra Clear Epoxy UC100". Colour of Blend (Clear & Untinted). Water Clear to Pale Amber when unpigmented.Specific Gravity (SG) of Blend. Roller Application (200micron) - 0.2Kg of Blend per sqm. 3Kg Kit covers 15sqm (Roller Application). Pour-On Application for Metallic Effect.
500mL to 1Lt per sqm (500micron to 1000micron Thickness). Thicker Clear Topcoat can be applied, if desirable. Specific resistance properties of Ultra Clear EPOXY UC100, in harsh chemicals. Suitable for Long term immersion.Suitable for Short-term immersion (Max 3 days). Very short contact time is OK, spill and splash. Tested in laboratory conditions at 25°C. Resistance properties of Ultra Clear Epoxy UC100. Resist Short term immersion in all alkalis.
All Epoxy Coatings may yellow with time. Weatherproof top coat may be used if required.
Resist continuous or long-term immersion in all Salts & Brine systems. Resistant to most hydrocarbon solvents and alcohols.Excellent resist to continuous or long term immersion in fresh & Salt Water. Resist splash and spills in all acids. Excellent when fully cured (7 Days). Application guideline to be provided to you.
Following is a step by step guide to install Metallic Epoxy topcoat over countertop, bar or benchtop surface of wood, concrete or metal. Cures in 8-16 hours at 25. High temperatures and windy conditions may speed the curing time. Ultra Clear Epoxy UC100 cures in 8-20 hours at 25. Keep away from the final coat for at least 16 hours and heavy objects for at least 7 days.
Full hardness is achieved after 7 days. Heavy objects with hot tires may cause damage on driveway. Use the surface once cured, however, avoid placing heavy objects over the new coated surface till completely cured (7 Days).
Do not apply Premium Tinted Epoxy PT105, if the surface has a patchy appearance as moisture may be present. Dry Test prior to application.Direct sunlight and UV radiation my result in chalking, colour variations and yellowing effect over time. All the products shall be stored out of direct sunlight and heat at all times.
The shelf life of the product is 24 months, mix uniformly for 3 minutes prior to use. Material Safety Data Sheet, Technical and Environmental Data Sheet can be provided upon request. Warranties and guarantees shall be governed by SHIMICOAT Standard Terms of Sale. The purchaser shall make its own tests to determine the suitability for their specific application, and Shimicoat Pty Ltd is taking no responsibility for misuse of the product. This product will be happily replaced or credited back if defective.Beyond this, Shimicoat Pty Ltd is not liable for any damages caused by this product or its use. This information and all further technical advice are based on our present knowledge and experience. The customer is not released from the obligation to conduct careful inspection and testing of supplied goods. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Paint, Stain & Varnish\Other Paint, Stain & Varnish". The seller is "shimicoat" and is located in this country: AU. This item can be shipped to United States.