PSR PTX35 DIY Upgrade Kit 3582 to 3584 GEN2 67mm Billet Wheel Turbo

PSR PTX35 DIY Upgrade Kit 3582 to 3584 GEN2 67mm Billet Wheel Turbo. This DIY upgrade kit is designed for any PT/X35 turbos with a compressor wheel smaller than 67.3mm, with this kit you can upgrade your turbo to a billet wheel PSR3584RS. It comes with a 10+0 blades 67.3/84.4mm billet compressor wheel which creates more air mass flow than over the gen1 11 blade wheel. If you have 6862mm turbine wheel, the capabilities ranging will be from 450 to 1000 horsepower. The only thing you need to do is to open the pocket for the larger compressor wheel exducer on your bearing housing to a diameter of 85.5mm. You will perfectly upgrade your current PT35 turbo to a billet PSR3584RS. The rebuild kit comes in this DIY kit has a. 72 A/R compressor cover (slip-on style) that allows the compressed air flow to circulate into the engine more efficiently. 1 o-ring bearing housing to backplate.

Professional installation is highly recommended! We usually keep the unpaid item only for 7 days. Please don't return the item without communication. At the same time, also please notify Racing-power with pertinent information. Shortage or Discrepancy Claim must be reported within forty-eight (48) hours of receipt of goods.

This is due to our inability to determine the pre-existing condition of the turbocharger before the rebuild or installation process, as well as our inability to guarantee proper re-balancing and assembly of the turbochargers.

---